CYBERLIVENETWORK
Live Network Topology Scanner // Windows
CyberLiveNetwork scans your actual local network using ARP discovery and ping sweeps, then displays the real devices it finds as a live topology map. Every device on your subnet is shown as a node — color-coded by type including routers, switches, cameras, NAS units, servers, and IoT devices.
Each node displays its real hostname, IP address, and MAC address. Your workstation is highlighted with a double-ring, and the router is centered as the hub node. A live packet activity log with timestamps scrolls in the corner, alongside a scrolling ARP table with real data and a network status panel showing subnet, node count, and scan mode.
The network scanner is built directly into the screensaver itself — no separate service, daemon, or configuration is needed. The scanner automatically rescans your network every 30 seconds to detect new devices and update the topology in real-time.
FEATURES
- Live ARP + ping network scanning
- Real device hostnames, IPs, and MAC addresses
- Color-coded device types (router, server, camera, NAS, IoT, etc.)
- Your workstation highlighted with double-ring
- Router centered as hub node
- Live packet activity log with timestamps
- Scrolling ARP table with real data
- Network status panel (subnet, node count, scan mode)
- Auto-rescans every 30 seconds
- Self-contained — scanner built into the .scr file
- No separate service or configuration needed
INSTALLATION
.SCR file below
C:\Windows\System32
Personalize > Lock Screen
Select from dropdown
REQUIREMENTS
> Windows 10/11 with Microsoft Edge installed
> Network access required for device scanning
> Admin rights needed to copy .SCR to System32
> Move mouse or press any key to exit screensaver
> Or double-click the .SCR file to test without installing
// LIVE DEMO //
Scans your local network and displays real devices in real-time.
Requires Windows with Microsoft Edge and network access.