3D PRINTABLE ENCLOSURE

Material: PLA or PETG recommended
Layer Height: 0.2mm for speed, 0.12mm for detail
Infill: 15-20% is sufficient
Supports: May be needed depending on orientation
Wall Thickness: 2-3 perimeters recommended
Color: Black or dark colors look best with the cyberpunk aesthetic

Little Web Server // STL Files for 3D Printing

Front shell / display mount for the Little Web Server enclosure. Houses the GC9A01 round display.

Back shell / electronics bay for the Little Web Server enclosure. Houses the ESP32-S3, TP4056 charger, and batteries.